TECHNICAL SPECIFICATIONS
- Shank diameter 3,2 mm
- Working diameter1 3,0 mm
- Grit 120
- Width 15,0 mm
- Maximum RPM 35.000 1/min
- Length 15,0
Sanding Band 13 mm 120 grit (432)
د.ك1.00
For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Compatible with both 407 sanding mandrel & SC407 EZ SpeedClic sanding mandrel.
Description
Additional information
| Brand | Dremel |
|---|---|
| Quantity | 6 |
| Max. RPM | 35.000 |
| Grit | 120 |
Reviews (0)
You must be logged in to post a review.
You may also like…
Bristle Brush 13,0 mm (404)
Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.
- Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
- Nylon bristles make it great for polishing silverware, jewelry and other precious metals
- Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels
- Can be used with polishing compound
Stainless Steel Brush 13 mm (531)
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.
- Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals
- It is very effective on flat surfaces and in hard-to-reach places, such as slots
- Stainless steel wire bristles
- Very effective on flat surfaces and in hard-to-reach places, such as slot
Sanding Band 13 mm 60 grit (408)
For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Compatible with both 407 sanding mandrel & SC407 EZ SpeedClic sanding mandrel.
Brass brush 13 mm (536)
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
- Ideal for cleaning and surface-finishing items
- For use on items made from gold, bronze, copper or brass
- Use a brass brush to create a soft, satin or matte finish
- Very effective on flat surfaces and in hard-to-reach areas like slots
Related products
Kreg Jig® K4
The Easy Way to Build with Wood!
- Perfect for do-it-yourselfers and anyone new to Kreg Joinery
- Removable Drill Guide for benchtop and portable use
- For use with materials from 1/2" to 11/2" thick (12-38mm)
- Hardened-steel Kreg drill guides feature a lifetime warranty
- Removable Drill Guide is great for making home repairs
- Wood-chip relief holes keep the drill bit clear of excess wood chips
Mirka Abranet 150mm Mesh Grip Disc 180G
- Abranet® has been developed for sanding putty, primers, lacquers, composite materials and a large amount of other materials. This is a durable long-lasting sanding material.
- Revolutionary new technique for dust-free sanding
- Multifunctional product used both within the automotive and wood industries as well as on composite materials
- Durable long-lasting product
GRR-RIP BLOCK Smart Pushblock
The Smart Choice for Safety.
Smart hooks grab the tail end of the board to give you complete control and confidence to finish the cut. Smart Hooks automatically drop down when you need them, and instantly retract mid-board. They can also be locked into the retracted position. There when you need them – out of the way when you don’t.
Material Support Stop
- For use with Kreg Jig® K3, K4, and K4MS (not compatible with K5)
- Supports workpiece at same height as Kreg Jig® base
- Can be positioned any distance from your Kreg Jig®
- Lets you repeat the same pocket hole over and over again
- Stop swings out of the way to serve as a support for large panels
Kreg Jig® HD
The Heavy-Duty Solution for Building with Wood
- Creates joints 50% stronger than standard Kreg Joints
- Optimized for large outdoor projects
- For use with materials 11/2" thick (38mm) and thicker
- Works with the Kreg Jig® K5, K4, and K3
- Stop Block provides easy, repeatable registration to workpiece
- Face Clamp locks into Kreg Jig HD for secure drilling
- Hex-Shank HD Drill Bit is Quick-Change compatible
Precision Router Table Setup Bars
- Exclusive 3-gauge design makes them perfect for many applications
- Concave step on bottom of each bar allows for precise height adjustment
- Step on top of each bar acts as gauge to test depth of completed cuts
- Step on end of each bar can set distance from tablesaw blade to fence, or router bit to fence
- Bars are made from soft aluminum to prevent router bit and saw blade damage
Polishing Wheel 26 mm
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402.
GRR-RIPPER Gravity Heel Kit Accessory
Hooks the tail end of your workpiece and automatically retracts mid-board. Provides extra leverage to help push through the cut and prevent blow out. For use with table saws, bandsaws, jointers and router tables.
Includes 5 Heels, 2 Heel Spacers and mounting hardware. Adjustable up to 1". Fits any existing GRR-RIPPER. Replacement Heels available.
Fits all GRR-RIPPER models.
Made in the USA. A true MICROJIG innovation.
Reviews
There are no reviews yet.