TECHNICAL SPECIFICATIONS
- Shank diameter
- 3,2 mm
- Working diameter
- 26,0 mm
- Width
- 25,0 mm
- Maximum RPM
- 20.000 1/min
- Length
- 25,0 mm
Polishing Wheel 26 mm
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402.
Description
Additional information
| Brand | Dremel |
|---|---|
| Product Type | Polish |
Reviews (0)
You must be logged in to post a review.
You may also like…
DREMEL® Fortiflex
Heavy duty flexible shaft – Work precisely for extended periods of time with complete control over your stationary projects
- High powered 300W motor for optimal performance.
- Variable speed 0-20.000 RPM for better control.
- High torque at lower speed ranges - for precision projects where high power is needed with lower RPM's.
- Foot pedal allows hands-free speed control.
- Robust long life Flex Shaft, with patented system to reduce rotation heat and increase its life time.
- Exchangeable precision hand piece through 'click' system.
- Easy change of accessories through drill-bit chuck.
- Ultimate precision through low collet run-out.
- Variable shank diameter (0.3 - 4.0mm), suitable for all high quality Dremel accessories.
DREMEL® 4200
Multi-Tool – Powerful. Dynamic. Intuitive to use.
- EZ Change: easy pull levers for the fastest, keyless accessory change
- 175W motor for high performance
- Electronic feedback for enhanced torque and performance
- Full variable speed control (5.000 - 33.000 RPM) for maximum precision
- Soft grip in all gripping areas for excellent handling
- Separate on/off switch for easy handling
- Not compatible with the 628, 4485 and 4486 accessories
DREMEL® 8200
Multi-Tool – Cordless. Fast. Maximum power.
- 3 LED battery gauge to monitor battery power.
- Innovative EZ Twist Nose Cap: no wrench required for changing accessories.
- Separate on/off switch with collet lock-out function prevents from accidentally activating the collet lock.
- Slide speed switch for full variable speed control up to 30.000 RPM.
- Soft grip for comfortable handling.
- Compact and powerful 10.8V Li-Ion battery with 1 hour charging time.
- High power 36mm electric motor for all your high demanding cutting jobs and more.
- Motor brake stops spinning of the accessory immediately.
Related products
Material Support Stop
- For use with Kreg Jig® K3, K4, and K4MS (not compatible with K5)
- Supports workpiece at same height as Kreg Jig® base
- Can be positioned any distance from your Kreg Jig®
- Lets you repeat the same pocket hole over and over again
- Stop swings out of the way to serve as a support for large panels
Kreg Jig® Mini
- Simplistic, compact design
- Unlimited material thickness and width positioning
- Hardened-steel drill guide with lifetime warranty
- Wood-chip relief hole for easy drilling
- Glass-reinforced nylon body
- Guide to help fully seat plugs
Kreg Jig® HD Driver Bit
- 6" (152mm) driver with deep #3 square drive
- Optimized for use with Kreg Jig® HD Screws
- Solid, one-piece construction
- Quick-Change compatibility
- Magnetic ti
Stainless Steel Brush 13 mm (531)
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.
- Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals
- It is very effective on flat surfaces and in hard-to-reach places, such as slots
- Stainless steel wire bristles
- Very effective on flat surfaces and in hard-to-reach places, such as slot
Aluminum Oxide Grinding Stone 9,5 mm
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials
GRR-RIP BLOCK Smart Pushblock
The Smart Choice for Safety.
Smart hooks grab the tail end of the board to give you complete control and confidence to finish the cut. Smart Hooks automatically drop down when you need them, and instantly retract mid-board. They can also be locked into the retracted position. There when you need them – out of the way when you don’t.
Brass brush 13 mm (536)
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
- Ideal for cleaning and surface-finishing items
- For use on items made from gold, bronze, copper or brass
- Use a brass brush to create a soft, satin or matte finish
- Very effective on flat surfaces and in hard-to-reach areas like slots
Bristle Brush 13,0 mm (404)
Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.
- Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
- Nylon bristles make it great for polishing silverware, jewelry and other precious metals
- Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels
- Can be used with polishing compound
Reviews
There are no reviews yet.