TECHNICAL SPECIFICATIONS
- Shank diameter
- 3,2 mm
- Working diameter
- 3,2 mm
- Accessory length
- 38,0 mm
- Width
- 3,0 mm
- Length
- 3,0 mm
- Maximum RPM
- 30.000 1/min
Back to products
Next product
Bosch PSR Select
د.ك33.00 د.ك27.00
High Speed Cutter 3,2 mm (118)
د.ك3.00
High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.
Description
Additional information
| Brand | Dremel |
|---|---|
| Product Type | High Speed Cutter |
| Quantity | 2 |
| Max. RPM | 30.000 |
Reviews (0)
You must be logged in to post a review.
You may also like…
High Speed Cutter 6,4 mm (117)
High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.
Related products
Material Support Stop
- For use with Kreg Jig® K3, K4, and K4MS (not compatible with K5)
- Supports workpiece at same height as Kreg Jig® base
- Can be positioned any distance from your Kreg Jig®
- Lets you repeat the same pocket hole over and over again
- Stop swings out of the way to serve as a support for large panels
GRR-RIP BLOCK Smart Pushblock
The Smart Choice for Safety.
Smart hooks grab the tail end of the board to give you complete control and confidence to finish the cut. Smart Hooks automatically drop down when you need them, and instantly retract mid-board. They can also be locked into the retracted position. There when you need them – out of the way when you don’t.
Kreg Jig® HD (Heavy-Duty) Drill Bit
- For use with the Kreg Jig® HD manual pocket-hole jig
- Compatible with Kreg Quick-Change Chuck and standard chucks
- Drills 1/2" (12mm) diameter pocket holes
- One-piece, hardened-steel design
Stainless Steel Brush 13 mm (531)
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.
- Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals
- It is very effective on flat surfaces and in hard-to-reach places, such as slots
- Stainless steel wire bristles
- Very effective on flat surfaces and in hard-to-reach places, such as slot
GRR-RIPPER Gravity Heel Kit Accessory
Hooks the tail end of your workpiece and automatically retracts mid-board. Provides extra leverage to help push through the cut and prevent blow out. For use with table saws, bandsaws, jointers and router tables.
Includes 5 Heels, 2 Heel Spacers and mounting hardware. Adjustable up to 1". Fits any existing GRR-RIPPER. Replacement Heels available.
Fits all GRR-RIPPER models.
Made in the USA. A true MICROJIG innovation.
NOVA SUPERNOVA2 CHUCK AND MOST POPULAR JAWS BUNDLE
- SuperNOVA2 Chuck, plus 3 most popular accessory jaws
- Quick Mounting
- Special NOVA wood turning dovetail profile
- Precision Machined
GRR-RIPPER Advanced 3D Pushblock
GRR-RIPPER Advanced 3D Pushblock comes with 3 legs featuring proprietary Green GRR-RIP® non-slip material, built-in balance support, adjustable handle, and includes two additional accessories: Stabilizing Plate, Adjustable Spacer.
Stabilizing Plate locks the material against the fence keeping your work square and flush. It provides 250% more stabilizing surface to keep your work under control when resawing on the table saw or routing on the router table.
Adjustable Spacer give you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts.
Bristle Brush 13,0 mm (404)
Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.
- Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
- Nylon bristles make it great for polishing silverware, jewelry and other precious metals
- Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels
- Can be used with polishing compound
Reviews
There are no reviews yet.