TECHNICAL SPECIFICATIONS
- Shank diameter 3,2 mm
- Working diameter 9,5 mm
- Accessory length 40,0 mm
- Width 10,0 mm
- Length 10,0 mm
- Maximum RPM 25.000 1/min
Aluminum Oxide Grinding Stone 9,5 mm (932)
د.ك2.00
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials.
Description
Additional information
| Brand | Dremel |
|---|---|
| Max. RPM | 25.000 |
| Material | Aluminum |
| Quantity | 3 |
Reviews (0)
You must be logged in to post a review.
You may also like…
Bristle Brush 13,0 mm (404)
Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.
- Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
- Nylon bristles make it great for polishing silverware, jewelry and other precious metals
- Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels
- Can be used with polishing compound
Aluminum Oxide Grinding Stone 9,5 mm
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials
Stainless Steel Brush 13 mm (531)
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.
- Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals
- It is very effective on flat surfaces and in hard-to-reach places, such as slots
- Stainless steel wire bristles
- Very effective on flat surfaces and in hard-to-reach places, such as slot
Related products
Sanding Sponge 80G
- Small, flexible sponge for general purpose sanding of a variety of materials
- Hand fit size
- Coated 4 sides
Material Support Stop
- For use with Kreg Jig® K3, K4, and K4MS (not compatible with K5)
- Supports workpiece at same height as Kreg Jig® base
- Can be positioned any distance from your Kreg Jig®
- Lets you repeat the same pocket hole over and over again
- Stop swings out of the way to serve as a support for large panels
Kreg Jig® Mini
- Simplistic, compact design
- Unlimited material thickness and width positioning
- Hardened-steel drill guide with lifetime warranty
- Wood-chip relief hole for easy drilling
- Glass-reinforced nylon body
- Guide to help fully seat plugs
Deflector / Connector for GRR-RIPPER and GRR-RIP BLOCK
Deflector/Connector also serves as a bridge between two GRR-RIP BLOCK or GRR-RIPPER Pushblocks. It allows for multiple configurations when used on the table saw, router table, and shaper. Connect two GRR-RIP BLOCKs for handling larger material like raise panel door fronts while you pattern route. Or connect two GRR-RIPPER in tandem for ripping longer stock.
Precision Router Table Setup Bars
- Exclusive 3-gauge design makes them perfect for many applications
- Concave step on bottom of each bar allows for precise height adjustment
- Step on top of each bar acts as gauge to test depth of completed cuts
- Step on end of each bar can set distance from tablesaw blade to fence, or router bit to fence
- Bars are made from soft aluminum to prevent router bit and saw blade damage
Polishing Wheel 26 mm
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402.
Kreg Jig® HD (Heavy-Duty) Drill Bit
- For use with the Kreg Jig® HD manual pocket-hole jig
- Compatible with Kreg Quick-Change Chuck and standard chucks
- Drills 1/2" (12mm) diameter pocket holes
- One-piece, hardened-steel design
GRR-RIPPER 3D Pushblock
It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision.
Reviews
There are no reviews yet.